Distillation Labware
Glassware and replacement parts designed to carry out distillations in laboratory settings; includes condensers, distillation heads, receivers, etc. Products are available for various scales and for specialty distillations.
Distillation is a process used widely in the laboratory or in wider working environments for separating or purifying liquids or liquid mixtures based on the different boiling points of individual components.
Distillation Applications:
• Separation and purification of miscible liquid mixtures in organic chemistry
• Drying of solid residues and/or solvent removal
• Fractional distillation of liquids from polymers and petroleum products
• Removal of particulates or other solid contaminants
• As part of a water purification system for production of distilled water for laboratory use
• Specialist steam distillation-based applications such as Kjeldahl analysis of nitrogen and proteins in food, beverage, or environmental samples
What Types of Distillation Equipment Are Available?
Conventional distillation apparatus, typically comprising individual, jointed borosilicate glassware components assembled by the user (depending upon the application), using appropriate clamps, stands, and supports. Most conventional distillation assemblies combine a round-bottomed distilling flask to contain and heat the liquid(s) that require purification, fitted with a stoppered or jointed neck to which is attached a downward-sloping, inclined side-arm for connection to a condensing unit to cool the heated vapors back down to their liquid state. Heating mantles are the preferred heat source for improved temperature control. These conventional distillation units are also available supplied complete and ready-assembled for added convenience and ease of use.
Specialized automated distillation equipment, notably units designed for the determination of volatile acidity and alcoholic strength by volume in wines, musts, and alcoholic beverages, and units designed for Kjeldahl nitrogen or protein determinations.
Chemglass Life Sciences Vacuum Trap BODY ONLY, Airfree, Schlenk, 57mm O-Ring Flange
Vacuum Trap BODY ONLY, Airfree, Schlenk, 57mm O-Ring Flange. Trap body is 57mm OD x 300mm in length to be used with a 4,300mL Dewar flask (CG-1593-05 or CG-1594-05). The seal between the trap stopper and body is made with a 57mm flat o-ring flange for total grease-free operation when used with either the AF-0060 or AF-0061 manifolds. Complete item consists of the trap stopper and body, one CG-139-02 horseshoe clamp, one #331 Viton o-ring and two #116 Viton o-rings.
Chemglass Life Sciences 10mL Flowmeter, Bubble
10mL Flowmeter, Bubble. Used for the control of carrier gases. Projection at top breaks bubbles. Supplied complete with rubber bulb. Hose connection has a O.D. of 9mm at the middle ring.
Chemglass Life Sciences Condenser, Gooseneck, Large, 29/42 Inner Joint, Distilling
Condenser, Gooseneck, Large, 29/42 Inner Joint, Distilling. Unique one-piece distilling condenser is actually a 75º adapter, highly efficient coil condenser and vacuum adapter in a compact one-piece unit. Available with a choice of three sizes of condensers with uptake inner joint as listed. Top thermometer joint is a 10/30 outer for use with a 3in immersion CG-3506 thermometer. Receiver joint on all sizes is a 24/40 inner having a sealed-in drip tip.
Chemglass Life Sciences Condenser C, 55/50, 750mm
Condenser C, 55/50, 750mm. Condenser replacement part for the CG137303 extraction apparatus. Fits Size C apparatus.
Chemglass Life Sciences Condenser A, 45/50, 350mm
Condenser A, 45/50, 350mm. Condenser replacement part for the CG137301 extraction apparatus. Fits Size A apparatus.
Chemglass Life Sciences Adapter, Distillation, Vent, 0-14mm Valve with Inlet Valve and 45/50 Lower Inner Jt
Adapter, Distillation, Vent, 0-14mm Valve with Inlet Valve and 45/50 Lower Inner Jt. Part of the CG-1965-D distallation glassware kit. ADAPTER ONLY.
Chemglass Life Sciences 50mL Tube, Storage, 14/20 Outer Joint, Airfree, Schlenk
50mL Tube, Storage, 14/20 Outer Joint, Airfree, Schlenk. Similar to AF-0522, but cylindrical in shape. The 25 and 50mL sizes have a 0-4mm Chem-Vac™ Chem-Cap valve while the 100 and 350mL sizes have a 0-8mm valve size.
Chemglass Life Sciences Distilling Receiver, 25mL, Moisture Test, Dean-Stark, 24/40 Joint Size, Approx. 330mm Height x 90mm Width
Distilling Receiver, 25mL, Moisture Test, Dean-Stark, 24/40 Joint Size, Approx. 330mm Height x 90mm Width. Dean-Stark receiver used for determining the water content of various materials. Can be used with ASTM Method D-95 along with similar ASTM methods. The 10mL size has subdivisions of 0.1 from 0 to 2mL, and 0.2 from 2 to 10mL. The 25mL size has subdivisions of 0.1 from 0 to 2mL and 0.2 from 2 to 25mL.
Chemglass Life Sciences Adapter, Distillation, 105°, 19/22 Joint Size
Adapter, Distillation, 105¿, 19/22 Joint Size. Distillation adapter with sealed in lower drip tip and top outer joints, both being the same size.
Chemglass Life Sciences 50L Process Reactor System, Squatty, Cylindrical, Jacketed, Glass, 400mm Flange, Brushless DC Electric Motor
50L Process Reactor System, Squatty, Cylindrical, Jacketed, Glass, 400mm Flange, Brushless DC Electric Motor. 50L Squatty, Low Profile, glass reactor system with 400mm flange, on Chemglass's innovative Kwik Mount support frame. This reactor maximizes clearance under the drain valve. 400mm ID Flange Provides Wider Access For Insertion or Probes, Baffles and Other Accessories without Interfering with Agitators. Heavy Duty 2" Diameter Solid Stainless Steel Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. Reactor Jacket Graduation Scale on Both Sides.
DC Scientific Glass Inc D86 RECEIVER FOR ISL OPTIDIST
This item has a minimum qty of 2 per supplier requirements.
D86 RECEIVER FOR ISL OPTIDIST
Chemglass Life Sciences Vacuum Trap Stopper Only, 40/50
Vacuum Trap Stopper Only, 40/50. Replacement part for CG451503 vacuum trap.
Chemglass Life Sciences Main Trap Body Only (D), Airfree, Schlenk
Main Trap Body Only (D), Airfree, Schlenk. Dual trap assembly for use with AF-0060 or AF-0061 manifolds. The main trap (D) is constructed using a 57mm flat o-ring flange and the body is 57mm OD x 250mm long. Center to center distance between the traps is 175mm. Trap assembly is designed to allow connection to either the right or left side of AF-0060 or AF-0061 manifolds. Complete item is supplied with one #331 Viton o-ring, one CG-139-02 horseshoe clamp, three #116 Viton o-rings and two CG-150-05 #28 Stainless Steel pinch clamps.